Features & Details
Hybrid Digital nCore Amplifier
Continuous Power: 180 Watts per channel into 8/4 ohms
Instantaneous Power: 250 Watts per channel
Vanishingly low harmonic and intermodulation distortion
Dual MDC2 Ports for expanded functionality
Optional MDC2 BluOS-D module adds BluOS multi-room streaming and Dirac Live room correction
Jitter-free 32-bit/384kHz ESS Sabre DAC
Ultra-low-noise MM phono stage with infrasonic filtering circuitry
Two optical, two coaxial digital inputs
HDMI-eARC input
Two pairs of line-level analogue inputs with low-noise buffer amplifiers
Speaker A/Speaker B outputs
Two-way aptX-HD Bluetooth
Dual subwoofer outputs
Dedicated headphone amplifier
IR remote
12V Trigger in/out
IR in/out
RS-232 Serial port for control integration with home automation systems
Control4, Crestron, RTI, URC, AMX, Savant, Elan certified
Specifications

Line In, Speaker Out (Analog bypass on)
Continuous output power into 8 ohms and 4 ohms: >180W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
THD (20 Hz – 20 kHz): <0.02% (250 mW to 180 W, 8 ohms and 4 ohms)
Signal/Noise Ratio: >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
Clipping power: 210W (at 1 kHz 0.1 % THD)
IHF dynamic power: 8 ohms: 217 W/ 4 ohms: 400 W / 2 ohms: 506.4 W
Peak output current: >26 A (in 1 ohm, 1 ms)
Damping factor: >150 (ref. 8 ohms, 20Hz to 6.5kHz)
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Channel Separation: >90dB (1 kHz) / >75dB (10 kHz)
Input sensitivity (for 180 W in 8 ohms): Line In: 201 mV / Digital In: 10.25% FS
Preamplifier

Line Input, Pre Out (Analog bypass on)

THD (20Hz-20kHz): <0.002 % at 2 V out
Signal/Noise Ratio: >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
Channel Separation: >100dB (1 kHz); >90 dB (10 kHz)
Input Impedance (R and C): 56 kohms + 100 pF
Maximum Input Signal: >4.6 Vrms (ref. 0.1 % THD)
Output Impedance: Source Z + 320 ohms
Input Sensitivity: 65mV (ref. 500 mV out, Volume maximum)
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Maximum voltage output – IHF load: >>5 V (ref. 0.1 % THD)
Phono

Phono Input, Pre Out (Analog bypass on)
THD (20Hz-20kHz): <0.01% at 2 V out
Signal to Noise Ratio: >84dB (200 ohms source; A-weighted, ref. 500 mV out)
Input Impedance (R and C): 46 kohms/100 pF
Input Sensitivity: 1.08mV (ref. 500 mV out, Volume maximum)
Frequency Response*: ±0.3 dB (20 Hz – 20 kHz)
Maximum Input Signal at 1kHz: >80 mVrms (ref. 0.1 % THD)
Headphone

Line Input, Headphone Out (Analog bypass on)
THD (20Hz-20kHz): <0.005% at 1V out
Signal/Noise Ratio: >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Channel Separation: >62 dB at 1kHz
Output Impedance: 2.2 Ohms
General Specifications
Supports bit rate/sample rate: up to 24 bit/192 kHz
Frequency band: 2.402G- 2.480G
Maximum transmit power (dBm): 7 dBm ± 2 dBm
Weight & Dimensions
Gross dimensions (W x H x D) **: 435 x 120 x 390mm / (17 1/8 x 4 3/4 x 15 3/8)”
Net Weight: 11.2kg (24.7lb)
Shipping Weight: 13.6kg (30lb)